How to choose a bandsaw blade for wood
81
Full article
Regular denotes the standard tooth form with a 0° rake angle, used with the finer pitches 14, 10, 8 and 6 TPI. The advantage of this geometry is a smooth, clean cut.
Skip denotes a geometry where every other tooth is "missing" – it is skipped. The tooth rake angle for Skip is 0° for a smooth and less aggressive entry into the cut. It is suitable for productive cutting and rough breakdown of material.
Hook denotes a hook-shaped tooth with an aggressive 10° rake angle. It is suitable for cutting hard or difficult-to-cut wood of larger diameters.
Good day, for a radius of 15mm you need a 6mm band (you cannot make a smaller radius with it), for a height of 20-80mm, 4tpi teeth are suitable "from the table".
So it would correspond to a 1400x6x0.65 4 skip band https://www.dudrsaw.eu/band-saw-blade-configurator-for-wood/produkt-14/1400/6-x-0-65/4-skip
Personally, however, I would rather read this article and fine-tune what you really need
https://www.dudrsaw.eu/technical-articles-and-advice/how-to-choose-a-band-saw-blade-for-wood-2
S.Kolařík | kolarik@simonds.cz
Good day,
in this size, we only offer Skip. If you would like the Regular tooth shape, you would have to choose a thicker saw blade 1400x6x0.65 mm.
Thank you, have a nice day
Pavel Dudr